Tabletop tripods are always nice to have whenever the need arises. While most mini tripods have the same features and functions, this one might offer more uses than most.
Every photographer should have at least one tabletop tripod. It’s a tool that will come in handy from time to time and may allow you to capture a shot at a crucial moment. They may not be accessories you would use every single day; in fact, they’ll probably sit unused for months. But when the need for a tripod that can be set up anywhere arises, tabletop tripods can make a huge difference.
In recent years, more and more brands have come up with their own versions of tabletop tripods, primarily because of the convenience they offer for vlogging and content creation. However, while there are probably over a hundred different manufacturers of portable mini tripods on the market, the majority of them have the same build, the same design, and the same standard features. This one from Tilta, however, has a few unique features that might make your tabletop tripod even more useful and versatile.
The Tilta BT03 Tabletop Tripod
The Tilta BT03 initially stands out due to two design features. The first is that it comes in gray, green, or white, and the second is that, even though it is a very small (and consequently light) tripod, it is made of carbon fiber. Considering the size of a tabletop tripod, it might not have been entirely necessary for it to be made of carbon fiber because the weight difference with aluminum might not be significant. However, in terms of design, the carbon fiber material does make it look more attractive overall.
The Tilta BT03 is a 2-section tripod with a minimum height of 10.8 inches (275 mm) at the standard leg angle (25 degrees) and a maximum height of 21.9 inches (555 mm) when the second section is fully extended. The legs can spread at wider angles when unlocked from the joint using the release button. There are three angle stops on the legs—namely, 25, 55, and 82 degrees—and with all legs at the widest angle, the tripod has a minimum working height of 5.1 inches (130 mm). Each section is demarcated by a single aluminum twist lock that matches the color of the head. The carbon fiber rods have a diameter of 16 mm on the more proximal section and 13 mm on the more distal section.
Near the center where the legs meet are three 1/4-inch threads with two locking pins each, positioned between the attachment points of the legs. These screw threads serve as accessory mounting points for virtually any accessory that uses a standard 1/4-inch screw. Ideally, these are best used for friction arms, hooks, and other mounting accessories. When used with such tools, the tripod can carry additional reasonably sized accessories such as microphones, triggers, intervalometers, portable lights, or even small action cameras that can be used individually or in combination with the main camera mounted on the ball head.
The Tilta BT03 comes with a small standard format ball head. It comes with a small knob that unlocks the 360 degree panning action and a larger knob that controls the friction of the ball joint. On one side of the ball head is another set of 1/4” screw thread with two locking pins that can be used for another extra accessory. The ball head is topped off with an arca swiss type quick release clamp that is compatible with all arca swiss type plates, L-brackets, rotating mounts, and even camera cages.
The Tilta BT03 weighs 428 grams (0.94 lbs) but can carry up to 3 kilograms (6.6 lbs) of gear when factoring in the ball joint friction payload. Realistically, it could probably carry beyond that weight using the additional accessory ports; however, balancing the load should be considered.
Application and User Experience
The Tilta BT03, like any tabletop tripod, is an accessory worth the minimal effort to bring along. It’s the same size as most tabletop tripods but, because of the mixed carbon fiber and aluminum build, it can carry a significant amount of load and be used securely with larger camera setups. While it’s probably best for use with portable vlogging cameras and point-and-shoot cameras, it can also securely hold larger mirrorless or even DSLR camera setups.
The unique design, with a combination of carbon fiber rods and parts available in white, gray, or green, definitely earns it extra points for standing out. However, what could be considered the most unique and useful feature of this tripod is the abundance of accessory ports on the central joint and on the side of the ball head. These ports, when used with the right mounting tools such as friction arms or double-sided studs, can support a wide variety of tools relevant to the tripod and camera’s use.
For a photographer using this tabletop tripod for quick and easy long-exposure shots from a tabletop, elevated platform, or even the ground, the accessory ports can hold an intervalometer, a specialized remote trigger, or even a simple counterweight to make the tripod more stable.
For vloggers and content creators, the accessory ports and mounting tools can provide more flexibility for external microphones. Using a long but lightweight friction arm, it’s even possible to position a sensitive shotgun microphone closer to the sound source, even if that’s not directly in front of the camera. Alternatively, the accessory points, when used with arms, can attach the tripod to a clamp mounted on railings or rods for added support at particularly unusual angles.
The Tilta BT03 definitely stands out as a mini tripod not only for its aesthetics but also for its compatibility with virtually anything that uses a 1/4-inch thread. The rods may seem a little thin compared to the twist locks but are certainly sufficient for bearing weight. The added flexibility in height due to the second leg section is also a handy feature.
What I Liked
- Unique design
- Carbon fiber material
- Abundant accessory ports
- Arca-Swiss type mount
What Can Be Improved:
- The leg rods can be made thicker to match the twist locks
- Possibly a couple of 3/8-inch threads